No products in the basket.
Nice RB400KCE Kit (8m 24v)
Nice RB400KCE Kit Sliding Gate Kit for Gates up to 400kg 24v
1 x RB400 24vdc 400kg irreversible electro-mechanical motor with built in control panel, electromechanical limit switch.
1 x ON2E 2-channel 433.92Mhz rolling code transmitters.
1 x Pair of MOFB photocells for connection via BlueBUS system.
1 x OXI 4-channel receiver.
1x MOSE Keyswitch.
1x MLBT Flashing Light.
User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside Robus.
Advanced: RB400 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
Sturdy: base and release in pressure die cast aluminium and epoxy paint finish.
Very quiet: gear motor on bearings.